China Custom CHINAMFG 100% Oil-Free Air Compressor wholesaler

Product Description

CHINAMFG Oil-free Air Compressor

BROTIE oil-free lubricated air compressors belong to reciprocating, piston, single action and air-cooled portable air compressors, they are designed for the departments which need pure air source and higher environmental requirements. There is no need to add lubricating oil for this product, the exhaust gas does not contain oil and oil vapor and won’t pollute environment, compressed air consuming equipment and its product, therefore, it is an environment-friendly energy-saving product.

1. When it is used as a general power gas source, it is more convenient in use than oil lubricated air compressor and its maintenance cost is lower.
2. As the simplest and optimum equipment which provides high-quality oilless compressed air, it saves complicated oil filtering and treatment equipment, thus saving a lot of equipment expenditure and maintenance cost.

Select a machine type with at least 20% allowance when determining compressed air consumption.
Please take into account the condition that consumption of compressed air may be increased in the future. Correct type selection will reduce purchase and use cost.
For detailed models, please contact with CHINAMFG with no hesitation.

Model Capacity
(m 3 /min)
Discharge pressure
(Mpa)
Speed
(r/min)
Noise
bd(A)
Motor Power
(KW)
Size of discharge Air Container Volume
(M3)
dimensions
(L*W*H)
ZW-0.1/7 0.1 0.7 980 ≤ 78 1.5(220V) G1/4″ 0.04 750*350*750
ZW-0.24/7 0.24 0.24 950 ≤ 81 2.2(380V) G1/2″ 0.08 1140*400*900
ZW-0.3/7 0.3 0.7 950 ≤ 81 2.2(380V) G1/2″ 0.08 1140*400*900
VW-0.45/7 0.45 0.7 920 ≤ 83 4(380V) G1/2″ 0.12 1300*460*960
VW-0.6/7 0.6 0.7 950 ≤ 84 5.5(380V) G1/2″ 0.12 1300*460*960
VW-0.42/10 0.42 1.0 920 ≤ 84 4(380V) G1/2″ 0.12 1300*460*960
VW-0.5/14 0.5 1.4 670 ≤ 84 5.5(380V) G1/2″ 0.18 1450*500*1100
WW-0.6/10 0.6 1.0 740 ≤ 84 5.5(380V) G1/2″ 0.18 1450*500*1100
WW-0.9/7 0.9 0.7 810 ≤ 84 7.5(380V) G1/2″ 0.18 1450*500*1100
WW-0.9/10 0.9 1.0 810 ≤ 84 7.5(380V) G1/2″ 0.18 1450*500*1100
WW-0.7/12.5 0.7 1.25 740 ≤ 84 7.5(380V) G1/2″ 0.18 1450*500*1100
WW-1.25/7 1.25 0.7 860 ≤ 85 11(380V) G3/4″ 0.28 1600*650*1200
WW-1.25/10 1.25 1.0 770 ≤ 85 11(380V) G3/4″ 0.28 1600*650*1200
WW-1.6/10 1.6 1.0 820 ≤ 85 15(380V) G3/4″ 0.32 1660*650*1220
WW-1.8/10 1.8 1.0 900 ≤ 86 15(380V) G3/4″ 0.32 1660*650*1220
WW-1.2/10 1.2 1.0 740 ≤ 84 5.5*2(380V) G1″ 0.30 1850*1250*1400
WW-1.8/7 1.8 0.7 810 ≤ 84 7.5*2(380V) G1″ 0.30 1850*1250*1400
WW-1.8/10 1.8 1.0 810 ≤ 84 7.5*2(380V) G1″ 0.30 1850*1250*1400
WW-1.4/12.5 1.4 1.25 740 ≤ 84 7.5*2(380V) G1″ 0.30 1850*1250*1400
WW-2.5/7 2.5 0.7 860 ≤ 86 11*2(380V) G1″ 0.30 1850*1250*1400
WW-2.5/10 2.5 1.0 770 ≤ 86 11*2(380V) G1″ 0.30 1850*1250*1400
WW-3.0/7 3.0 0.7 770 ≤ 86 11*2(380V) G1″ 0.32 1850*1250*1400
WW-3.0/10 3.0 1.0 810 ≤ 86 11*2(380V) G1″ 0.32 1850*1250*1400
WW-3.2/7 3.2 0.7 820 ≤ 86 15*2(380V) G1″ 0.32 1900*1500*1500
WW-3.2/10 3.2 1.0 820 ≤ 86 15*2(380V) G1″ 0.32 1900*1500*1500
WW-3.6/7 3.6 0.7 900 ≤ 86 15*2(380V) G1″ 0.32 1900*1500*1500
WW-3.6/10 3.6 1.0 900 ≤ 86 15*2(380V) G1″ 0.32 1900*1500*1500
WW-4.8/10 4.8 1.0 900 ≤ 86 15*2(380V) 11*1(380V) G3/2″ / 2210*1360*1050

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Performance: Low Noise
Type: Piston
Drive Mode: Electric
Piston Type: Closed
Configuration: Portable
Power Source: AC Power
Customization:
Available

|

air compressor

What Is the Role of Air Dryers in Oil-Free Air Compressor Systems?

Air dryers play a crucial role in oil-free air compressor systems by removing moisture from the compressed air, ensuring dry and moisture-free output. Here’s a detailed explanation of the role of air dryers in oil-free air compressor systems:

1. Moisture Removal:

One of the primary functions of air dryers in oil-free air compressor systems is to remove moisture from the compressed air. During the compression process, atmospheric air is compressed, leading to an increase in temperature. As the compressed air cools down, the water vapor present in the air can condense, resulting in the formation of liquid water. Moisture in the compressed air can cause a range of issues, including corrosion, damage to pneumatic equipment, reduced efficiency in downstream processes, and contamination of products or processes. Air dryers effectively remove this moisture, ensuring that the compressed air remains dry and free from water vapor.

2. Condensation Prevention:

Air dryers also help prevent condensation from occurring within the compressed air system. By removing moisture from the compressed air, air dryers minimize the chances of condensation forming in the compressed air lines, storage tanks, and downstream equipment. Condensation can lead to the accumulation of water, which can cause blockages, corrosion, and other operational issues. Air dryers help maintain the integrity and reliability of the compressed air system by preventing condensation-related problems.

3. Protection of Equipment:

Moisture in the compressed air can be detrimental to pneumatic equipment and tools. Air dryers help protect this equipment by ensuring that the air supplied is dry and free from moisture. Dry air prevents corrosion of internal components, extends the lifespan of pneumatic tools, and helps maintain their optimal performance. By removing moisture, air dryers contribute to the overall reliability and efficiency of the oil-free air compressor system.

4. Purification of Compressed Air:

Air dryers also aid in the purification of compressed air by removing impurities and contaminants, including water vapor, oil droplets, and solid particles. While the primary purpose of air dryers is to remove moisture, they often incorporate additional filtration stages, such as coalescing filters or desiccant beds, to capture and remove other impurities. These filtration stages work in conjunction with the drying process to deliver clean, dry, and purified compressed air that meets the required air quality standards.

5. Optimal Performance:

Properly dried and moisture-free compressed air ensures optimal performance in various applications. In industries such as food and beverage, pharmaceuticals, electronics manufacturing, and painting, where air quality is critical, the use of air dryers is essential to meet specific air purity requirements. Dry compressed air enhances the efficiency and reliability of pneumatic systems, reducing the risk of malfunctions, downtime, and product contamination.

It’s important to note that different types of air dryers are available for oil-free air compressor systems, including refrigerated dryers, desiccant dryers, and membrane dryers. Each type has its own operating principles and suitability for different applications. The selection of the appropriate air dryer depends on factors such as the required level of dryness, the volume of compressed air, operating conditions, and specific industry requirements.

By incorporating air dryers into oil-free air compressor systems, operators can achieve and maintain dry, moisture-free compressed air, ensuring the reliability, efficiency, and integrity of downstream processes and equipment.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

What Are the Advantages of Using Oil-Free Air Compressors?

Oil-free air compressors offer several advantages over their oil-lubricated counterparts. These compressors are designed to deliver clean, oil-free compressed air and provide benefits in various applications. Here’s a detailed explanation of the advantages of using oil-free air compressors:

1. Clean and Oil-Free Air:

The primary advantage of oil-free air compressors is that they produce compressed air that is free from oil contamination. This makes them suitable for applications where oil-free air is crucial, such as in industries like food and beverage, pharmaceuticals, electronics, and painting. Oil-free compressed air ensures product quality, prevents contamination of sensitive equipment, and eliminates the risk of oil-related issues in downstream processes.

2. Reduced Maintenance:

Oil-free compressors generally require less maintenance compared to oil-lubricated compressors. Since there is no oil to change or monitor, maintenance tasks related to oil filtration, oil changes, and oil disposal are eliminated. This can result in cost savings, reduced downtime, and simplified maintenance schedules.

3. Elimination of Oil Contamination Risk:

With oil-free compressors, there is no risk of oil contaminating the compressed air system. This eliminates the need for additional filtration or separation equipment to remove oil from the compressed air. It simplifies the overall system design, reduces the risk of oil-related equipment failure, and minimizes the maintenance and associated costs.

4. Compact and Lightweight:

Oil-free compressors are often designed to be compact and lightweight, making them portable and easy to transport. This feature is advantageous for applications where mobility is required, such as construction sites, workshops, and on-site maintenance tasks.

5. Quiet Operation:

Oil-free compressors tend to operate at lower noise levels compared to oil-lubricated compressors. The absence of oil lubrication reduces the friction and mechanical noise, resulting in quieter operation. This makes oil-free compressors more suitable for noise-sensitive environments or applications where reduced noise levels are desired.

6. Environmental Considerations:

Oil-free air compressors are environmentally friendly due to the absence of oil. They eliminate the risk of oil spills or leaks that can harm the environment. Furthermore, oil-free compressors may require less energy consumption compared to oil-lubricated compressors, contributing to energy efficiency and reduced carbon footprint.

7. Lower Initial Cost:

In general, oil-free compressors tend to have a lower initial cost compared to oil-lubricated compressors. This can be advantageous for applications with budget constraints or when the specific requirements of the application align with the capabilities of oil-free compressors.

It’s important to note that oil-free air compressors may have certain limitations compared to oil-lubricated compressors. They may have lower maximum operating pressures and higher operating temperatures. Additionally, the absence of oil lubrication may result in slightly reduced efficiency and increased wear on certain components over time.

By considering these advantages, users can determine whether oil-free air compressors are suitable for their specific application and requirements.

China Custom CHINAMFG 100% Oil-Free Air Compressor   wholesaler China Custom CHINAMFG 100% Oil-Free Air Compressor   wholesaler
editor by CX 2024-02-26

Recent Posts