China factory Bangwin Totally Oil-Free Air Compressor air compressor portable

Product Description

Product Name Oil-Free Booster Compressor
Model No BW-3/5/10/15/20/30…
Inlet Pressure 0.4Mpa( G )
Exhaust Pressure 150/200Mpa( G )
Type High Pressure Oil Free
Accessories Filling Manifold, Piston ring, Etc

Oilless High Pressure O2 Compressor Specification
NO Volume Inlet pressure Outlet pressure Type Cooling type
1 1-3m³ 0.3-0.4MPa 15MPa 2 lines 4 stages vertical type Wind
2 4-12m³ 0.3-0.4MPa 15MPa 2 lines 4 stages vertical type Wind
3 13-40m³ 0.3-0.4MPa 15MPa 3 lines 3 stages W type Water
4 13-60m³ 0.2-0.4MPa 15MPa 2 lines 4 stages vertical type Water
5 40-80m³ 0.2-0.4MPa 15MPa 4 lines 4 stages S type Water
6 80-120m³ 0.2-0.4MPa 15MPa 4 lines 4 stages S type Water

If you have compressor inquiry please tell us follows information when you send inquiry:

*Compressor working medium: If single gas ,how many purity ? if mixed gas , what’s gas content lit ?

*Suction pressure(gauge pressure):_____bar

*Exhaust pressure(gauge pressure):_____bar

*Flow rate per hour for compressor: _____Nm³/h

Compressor gas suction temperature:_____ºC

Compressor working hours per day :_____hours

Compressor working site altitude :_____m

Environment temperature : _____ºC

Has cooling water in the site or not ?______

Voltage and frequency for 3 phase :____________

Do not has water vapor or H2S in the gas ?______

Application for compressor?__________

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Warranty: 1 Year
Product Name: Oxygen,Nitrogen Compressor
Gas Type: Oxygen,Nitrogen,Special Gas
Cooling Method: Air Cooling Water Cooling
Application: Filling Cylinder
Customization:
Available

|

air compressor

What Maintenance Is Required for Oil-Free Air Compressors?

Maintaining oil-free air compressors is crucial to ensure their optimal performance, reliability, and longevity. While oil-free compressors have lower maintenance requirements compared to oil-lubricated compressors, regular maintenance tasks are still necessary. Here’s a detailed explanation of the maintenance required for oil-free air compressors:

1. Regular Filter Replacements:

Oil-free air compressors have filters that help remove contaminants from the intake air. These filters should be regularly inspected and replaced as recommended by the manufacturer. Filters can become clogged over time, affecting the compressor’s efficiency and potentially increasing the risk of contaminants entering the compressed air stream. Regular filter replacements ensure proper air filtration and help maintain the desired level of air purity.

2. Condensate Drainage:

Oil-free compressors produce condensate, which is a mixture of water and oil-free compressed air. Proper condensate drainage is essential to prevent water buildup in the system, which can lead to corrosion and damage. Most oil-free compressors have automatic condensate drains that remove accumulated condensate. It’s important to regularly check and maintain these drains to ensure they are functioning correctly and prevent any blockages or leaks.

3. Inspection of Air Hoses and Connections:

Regularly inspecting air hoses, fittings, and connections is important to identify any leaks or damage. Leaks can lead to air pressure loss, reduced compressor efficiency, and increased energy consumption. Damaged hoses or connections should be repaired or replaced promptly to maintain the integrity of the compressed air system. Regular inspections can help identify potential issues early on and prevent costly breakdowns or inefficiencies.

4. Monitoring Air Pressure and Temperature:

Monitoring the air pressure and temperature of the compressor system is crucial for identifying any abnormalities or deviations from the desired operating parameters. Most oil-free compressors have built-in pressure and temperature sensors that provide real-time data. Regularly checking and recording this data can help detect any potential issues, such as pressure drops, abnormal temperature increases, or excessive cycling. If any abnormalities are detected, they should be investigated and addressed promptly to prevent further damage to the compressor.

5. General System Checks:

Performing general system checks on a regular basis helps ensure that all components of the oil-free air compressor are functioning properly. This includes inspecting the compressor motor, cooling fans, belts, and electrical connections. Any signs of wear, damage, or abnormal noise should be addressed promptly. Additionally, checking the compressor for any signs of oil contamination or unusual odors can help identify potential issues with the compressor system.

6. Manufacturer’s Recommendations:

It’s essential to follow the manufacturer’s recommended maintenance schedule and guidelines for the specific oil-free air compressor model. The manufacturer’s recommendations may include additional maintenance tasks specific to the compressor’s design and components. Adhering to these guidelines ensures that the compressor is properly maintained and can help prevent warranty issues.

Regular and proactive maintenance of oil-free air compressors is essential to ensure their reliable and efficient operation. Following the recommended maintenance tasks, monitoring system parameters, and promptly addressing any issues that arise can help extend the compressor’s lifespan, reduce the risk of breakdowns, and maintain the desired air quality for the intended applications.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

Are Oil-Free Air Compressors More Environmentally Friendly?

Oil-free air compressors are considered more environmentally friendly compared to oil-lubricated air compressors. These compressors offer several features and advantages that contribute to their eco-friendly nature. Here’s a detailed explanation of why oil-free air compressors are considered more environmentally friendly:

1. Elimination of Oil Contamination:

One of the significant environmental benefits of oil-free air compressors is the elimination of oil contamination in the compressed air system. Oil-lubricated compressors require oil for lubrication, which can potentially leak or contaminate the compressed air. Oil contamination can have adverse effects on downstream equipment, processes, and the environment. In contrast, oil-free air compressors operate without oil, ensuring clean, oil-free compressed air and eliminating the risk of oil contamination.

2. Reduction of Oil Spills and Leaks:

Oil-lubricated compressors have a higher risk of oil spills or leaks due to the presence of lubricating oil in the system. Oil spills can have severe environmental consequences, polluting soil, water bodies, and ecosystems. Oil-free air compressors eliminate the risk of oil spills or leaks, as there is no oil used in the compression process. This reduces the potential harm to the environment and minimizes the need for costly cleanup efforts.

3. Energy Efficiency:

Oil-free air compressors can be more energy-efficient compared to oil-lubricated compressors. The absence of oil in the compression chamber reduces internal friction and mechanical losses, resulting in improved energy efficiency. Energy-efficient compressors consume less electricity, leading to reduced energy consumption and lower greenhouse gas emissions. By using oil-free compressors, businesses can contribute to energy conservation and environmental sustainability.

4. Lower Environmental Footprint:

Due to the elimination of oil-related maintenance tasks, such as oil filtration, oil changes, and oil disposal, oil-free compressors have a lower environmental footprint. These maintenance activities associated with oil-lubricated compressors require the use of resources and generate waste, including used oil and oil filters. By using oil-free compressors, the consumption of resources and the generation of hazardous waste are reduced, contributing to a more sustainable and environmentally friendly operation.

5. No Oil Contamination in Air Tools and Products:

Oil contamination in compressed air can have detrimental effects on air tools, pneumatic equipment, and end products. Oil-free air compressors ensure that the compressed air delivered to these devices is clean and oil-free. This helps maintain the performance and longevity of air tools and prevents oil-related product defects. By using oil-free compressors, businesses can avoid costly repairs or replacements of equipment and minimize the risk of producing non-conforming or defective products.

It’s important to note that while oil-free air compressors offer environmental advantages, they may have certain limitations and considerations. These include the need for specialized maintenance, potential higher operating temperatures, and reduced maximum operating pressures compared to oil-lubricated compressors. Therefore, it’s essential to evaluate the specific requirements of the application and consider the trade-offs between environmental benefits and operational considerations when choosing an air compressor.

China factory Bangwin Totally Oil-Free Air Compressor   air compressor portableChina factory Bangwin Totally Oil-Free Air Compressor   air compressor portable
editor by CX 2024-04-25

Recent Posts