China factory Oil-Free Air Compressor No Oil with Good quality

Product Description

CHINAMFG Oil-free Air Compressor

CHINAMFG oil-free lubricated air compressors belong to reciprocating, piston, single action and air-cooled portable air compressors, they are designed for the departments which need pure air source and higher environmental requirements. There is no need to add lubricating oil for this product, the exhaust gas does not contain oil and oil vapor and won’t pollute environment, compressed air consuming equipment and its product, therefore, it is an environment-friendly energy-saving product.

1. When it is used as a general power gas source, it is more convenient in use than oil lubricated air compressor and its maintenance cost is lower.
2. As the simplest and optimum equipment which provides high-quality oilless compressed air, it saves complicated oil filtering and treatment equipment, thus saving a lot of equipment expenditure and maintenance cost.

Select a machine type with at least 20% allowance when determining compressed air consumption.

Please take into account the condition that consumption of compressed air may be increased in the future. Correct type selection will reduce purchase and use cost.

For detailed models, please contact with CHINAMFG with no hesitation.

Model Capacity
(m 3 /min)
Discharge pressure
(Mpa)
Speed
(r/min)
Noise
bd(A)
Motor Power
(KW)
Size of discharge Air Container Volume
(M3)
dimensions
(L*W*H)
ZW-0.1/7 0.1 0.7 980 ≤ 78 1.5(220V) G1/4″ 0.04 750*350*750
ZW-0.24/7 0.24 0.24 950 ≤ 81 2.2(380V) G1/2″ 0.08 1140*400*900
ZW-0.3/7 0.3 0.7 950 ≤ 81 2.2(380V) G1/2″ 0.08 1140*400*900
VW-0.45/7 0.45 0.7 920 ≤ 83 4(380V) G1/2″ 0.12 1300*460*960
VW-0.6/7 0.6 0.7 950 ≤ 84 5.5(380V) G1/2″ 0.12 1300*460*960
VW-0.42/10 0.42 1.0 920 ≤ 84 4(380V) G1/2″ 0.12 1300*460*960
VW-0.5/14 0.5 1.4 670 ≤ 84 5.5(380V) G1/2″ 0.18 1450*500*1100
WW-0.6/10 0.6 1.0 740 ≤ 84 5.5(380V) G1/2″ 0.18 1450*500*1100
WW-0.9/7 0.9 0.7 810 ≤ 84 7.5(380V) G1/2″ 0.18 1450*500*1100
WW-0.9/10 0.9 1.0 810 ≤ 84 7.5(380V) G1/2″ 0.18 1450*500*1100
WW-0.7/12.5 0.7 1.25 740 ≤ 84 7.5(380V) G1/2″ 0.18 1450*500*1100
WW-1.25/7 1.25 0.7 860 ≤ 85 11(380V) G3/4″ 0.28 1600*650*1200
WW-1.25/10 1.25 1.0 770 ≤ 85 11(380V) G3/4″ 0.28 1600*650*1200
WW-1.6/10 1.6 1.0 820 ≤ 85 15(380V) G3/4″ 0.32 1660*650*1220
WW-1.8/10 1.8 1.0 900 ≤ 86 15(380V) G3/4″ 0.32 1660*650*1220
WW-1.2/10 1.2 1.0 740 ≤ 84 5.5*2(380V) G1″ 0.30 1850*1250*1400
WW-1.8/7 1.8 0.7 810 ≤ 84 7.5*2(380V) G1″ 0.30 1850*1250*1400
WW-1.8/10 1.8 1.0 810 ≤ 84 7.5*2(380V) G1″ 0.30 1850*1250*1400
WW-1.4/12.5 1.4 1.25 740 ≤ 84 7.5*2(380V) G1″ 0.30 1850*1250*1400
WW-2.5/7 2.5 0.7 860 ≤ 86 11*2(380V) G1″ 0.30 1850*1250*1400
WW-2.5/10 2.5 1.0 770 ≤ 86 11*2(380V) G1″ 0.30 1850*1250*1400
WW-3.0/7 3.0 0.7 770 ≤ 86 11*2(380V) G1″ 0.32 1850*1250*1400
WW-3.0/10 3.0 1.0 810 ≤ 86 11*2(380V) G1″ 0.32 1850*1250*1400
WW-3.2/7 3.2 0.7 820 ≤ 86 15*2(380V) G1″ 0.32 1900*1500*1500
WW-3.2/10 3.2 1.0 820 ≤ 86 15*2(380V) G1″ 0.32 1900*1500*1500
WW-3.6/7 3.6 0.7 900 ≤ 86 15*2(380V) G1″ 0.32 1900*1500*1500
WW-3.6/10 3.6 1.0 900 ≤ 86 15*2(380V) G1″ 0.32 1900*1500*1500
WW-4.8/10 4.8 1.0 900 ≤ 86 15*2(380V) 11*1(380V) G3/2″ / 2210*1360*1050

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Power Source: AC Power
Configuration: Portable
Type: Reciprocating
Model Number: Brc-Air
Place of Origin: China
Customization:
Available

|

air compressor

Can Oil-Free Air Compressors Handle High-Pressure Applications?

Yes, oil-free air compressors are capable of handling high-pressure applications, but certain considerations need to be taken into account. Here’s a detailed explanation of the capabilities and considerations regarding the use of oil-free air compressors in high-pressure applications:

1. Compressor Design:

Oil-free air compressors are designed to deliver oil-free compressed air, and some models are specifically engineered to handle high-pressure requirements. These compressors incorporate robust components, such as high-strength materials, reinforced valves, and advanced sealing technologies, to withstand the higher pressures generated during compression. They are typically designed to operate within specific pressure ranges, and their performance and reliability are optimized for those ranges.

2. Pressure Rating:

When selecting an oil-free air compressor for a high-pressure application, it is crucial to consider the compressor’s pressure rating. The pressure rating indicates the maximum pressure that the compressor can reliably generate and maintain. Oil-free compressors suitable for high-pressure applications are available with varying pressure ratings, ranging from several hundred PSI (pounds per square inch) to several thousand PSI, depending on the specific model and manufacturer. It’s important to choose a compressor with a pressure rating that meets or exceeds the requirements of the intended application.

3. Operating Efficiency:

Operating efficiency is an important consideration when using oil-free air compressors for high-pressure applications. As the pressure requirement increases, the compressor may consume more energy to achieve and maintain the desired pressure. It’s advisable to select a compressor that is optimized for energy efficiency, as it can help reduce operating costs and minimize environmental impact. Compressors equipped with advanced control systems, variable speed drives, and efficient motor designs can enhance overall energy efficiency in high-pressure applications.

4. Air Treatment and Filtration:

High-pressure applications often require dry and clean compressed air. In addition to the oil-free operation, it is important to ensure that the compressed air is adequately treated and filtered to remove moisture, particulates, and other contaminants. The use of appropriate air dryers, filters, and separators in the compressed air system is necessary to maintain the desired air quality and protect downstream equipment in high-pressure applications.

5. System Safety and Regulations:

High-pressure applications present additional safety considerations. It is essential to ensure that the entire compressed air system, including the compressor, storage tanks, piping, and safety devices, is designed, installed, and operated in compliance with relevant safety regulations and standards. Pressure relief valves, pressure gauges, and other safety devices should be appropriately sized and configured to handle the high-pressure conditions. Regular inspections, maintenance, and adherence to safety protocols are crucial to ensure the safe operation of the high-pressure oil-free air compressor system.

It’s important to consult with compressor manufacturers or industry experts to determine the suitability of specific oil-free compressors for high-pressure applications. They can provide guidance on selecting the right compressor model, assessing system requirements, and ensuring compliance with safety standards.

By considering the design, pressure rating, operating efficiency, air treatment, and system safety, oil-free air compressors can successfully handle high-pressure applications in various industries, including manufacturing, automotive, aerospace, and energy.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

What Industries Commonly Use Oil-Free Air Compressors?

Oil-free air compressors are utilized in various industries where clean and oil-free compressed air is essential for specific applications. These industries rely on oil-free compressors to ensure product quality, maintain equipment integrity, and meet industry regulations. Here’s a detailed explanation of the industries commonly using oil-free air compressors:

1. Food and Beverage:

The food and beverage industry extensively employs oil-free air compressors. These compressors are used in processes such as food packaging, filling, bottling, and product drying. Oil-free compressors prevent oil contamination, ensuring product quality, food safety, and compliance with industry regulations. They help maintain the freshness of food products, prevent flavor or odor contamination, and minimize the risk of product spoilage.

2. Pharmaceutical and Healthcare:

In the pharmaceutical and healthcare sectors, oil-free air compressors are vital for maintaining the purity and integrity of medical gases, powering respiratory devices, and supporting laboratory applications. Oil-free compressors deliver clean and uncontaminated compressed air for critical processes, such as ventilators, nebulizers, surgical instruments, dental tools, and laboratory testing. They ensure patient safety, regulatory compliance, and reliable operation in these sensitive environments.

3. Electronics and Semiconductor:

The electronics and semiconductor industries require oil-free air compressors for various applications. These compressors are used in cleanrooms and manufacturing processes where air quality is crucial to prevent contamination of sensitive electronic components. Oil-free compressors provide clean and dry compressed air for applications like chip manufacturing, circuit board assembly, and air knife systems. They help ensure the reliability and quality of electronic products while minimizing the risk of particle contamination.

4. Automotive and Aerospace:

In the automotive and aerospace industries, oil-free air compressors are utilized for painting, coating, and pneumatic tools. These compressors deliver clean, oil-free compressed air, ensuring high-quality finishes and preventing oil contamination that could affect adhesion or cause defects. Oil-free compressors play a critical role in maintaining the precision and reliability of pneumatic tools used in assembly lines, manufacturing processes, and aircraft maintenance.

5. Textile and Garment:

The textile and garment industries rely on oil-free air compressors for various applications, including powering pneumatic tools, air agitation in dyeing processes, and providing clean compressed air for textile manufacturing. Oil-free compressors prevent oil contamination that could stain or damage fabrics, ensuring product quality and minimizing the risk of production defects. They help maintain efficiency and reliability in textile production while meeting strict quality standards.

6. Chemical and Petrochemical:

The chemical and petrochemical industries utilize oil-free air compressors in critical processes where air purity is essential. These compressors are used in applications such as air sparging, pneumatic conveying, and instrument air supply. Oil-free compressors ensure that the compressed air does not introduce contaminants, ensuring the integrity of chemical reactions, preventing product contamination, and maintaining the safety of equipment and personnel.

7. Research and Laboratories:

Research facilities and laboratories across various industries rely on oil-free air compressors for a wide range of applications. These include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressors provide clean and reliable compressed air, ensuring accurate test results, preventing contamination, and maintaining the integrity of samples and experiments.

It’s important to note that while these industries commonly use oil-free air compressors, the specific requirements may vary based on the application and industry standards. Selecting the appropriate oil-free compressor and adhering to recommended maintenance practices are crucial to achieve optimal performance and meet industry-specific needs.

China factory Oil-Free Air Compressor No Oil   with Good qualityChina factory Oil-Free Air Compressor No Oil   with Good quality
editor by CX 2024-05-03

Recent Posts