China Professional Oil Free Medical Air Compressor 545W for Dental Chair Unit portable air compressor

Product Description


Medical silent Oilless Dental Oil Free Air Compressor unit

 

Voltage 110V~240V, 50Hz/60Hz 
Power  545W
Speed 1400-1500RPM
Airflow 118L/min 
Noise 52dB
Tank 24L 
Pressure 8Bar 
N.W 24Kgs 
Dimension 41*41*55cm

Features:

1. Ultra-quiet: The sound is very low when the air compressor is working to meet all requirements for indoor use.

2. Ultra-clean: Pure oil-free design, original oil lubricated piston system, high efficiency, low loss, ultra-clean exhaust gas, to meet the needs of the equipment, and protect the safety of the operator, so far as to response to the “green” global call.

3. Anti-rust coating: Inside the gas tank has rust, anti-bacterial treatment, to ensure gas cleanliness and product safety.

4. Low energy consumption: Pressure and gas production take on the CHINAMFG ratio, under the conditions of the least energy consumption fastest output up to the gas source, and automated design for starting and stopping , not only save power, the more you do not need worry.

5. Technology: cylinder liner system exclusive development of nano-coating technology to abandon ordinary oil-free material manufacturers, quieter, cleaner, longer life, to meet the more demanding areas, such as food, medicine industry.

6. Dry sterilization: Special double vacuum drying and filtration equipment, not just the removal of particulate impurities, little more than a sterilization effect, to meet the supply of high purity gas source and protect the user equipment.

7. Safety in Use: The machine is equipped with multiple automatic protection system, when use
environment voltage, pressure or current any exception will automatically shut down to protect the safety of equipment and personal.

8. Easy to use: Electrical connection with automated design, working without staff on duty; pressure can be adjusted freely according to requirements, without complicated maintenance, just regular water supply and drainage.
Stylish.

9. Appearance: CHINAMFG Medical Air Compressor have fashion design, good performance and practical, regulate the operation of the working life of 20,000 hours or more; various design are the industry’s top engineers for natural Thatcher.

More details , please contact us.
Kathy 
 

 

 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Oil Free Air Comperssor
Material: Metal
Applicable Departments: Oral Rehabilitation Department
Certification: CE
Kind: Needle & Hook
Voltage: 110V – 240V, 50Hz/60Hz 
Samples:
US$ 225/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Do You Ensure the Air Quality Produced by Oil-Free Compressors?

Ensuring the air quality produced by oil-free compressors involves a combination of factors, including proper equipment selection, appropriate maintenance practices, and adherence to industry standards. Here’s a detailed explanation of how to ensure the air quality produced by oil-free compressors:

1. Equipment Selection:

Choosing the right oil-free compressor is the first step in ensuring air quality. It is essential to select a compressor that is specifically designed for applications requiring clean air, such as food and beverage processing, pharmaceutical manufacturing, electronics assembly, and medical facilities. Consideration should be given to the compressor’s filtration capabilities, air treatment options, and compliance with relevant industry standards and regulations.

2. Filtration Systems:

The filtration systems integrated into oil-free compressors play a crucial role in maintaining air quality. These systems typically include pre-filters, coalescing filters, and activated carbon filters. Pre-filters remove larger particles, coalescing filters capture smaller particles and coalesce water vapor, and activated carbon filters absorb odors and remaining oil vapors. Regular inspection and replacement of filters are necessary to ensure their effectiveness in removing contaminants from the compressed air.

3. Regular Maintenance:

Regular maintenance is key to preserving air quality. This includes following the manufacturer’s recommended maintenance schedule, which may involve tasks such as filter replacement, lubrication of non-compressed parts, and inspection of seals and gaskets. Proper maintenance helps prevent air leaks, ensures the compressor operates efficiently, and reduces the risk of contamination.

4. Air Quality Testing:

Periodic air quality testing is essential to verify the effectiveness of the oil-free compressor and its filtration system. Air quality testing can involve measuring parameters such as oil content, particulate matter, moisture levels, and microbiological contamination. By conducting regular air quality tests, any deviations from the desired air quality standards can be identified, allowing for corrective actions to be taken promptly.

5. Compliance with Standards:

Adhering to industry standards and regulations is crucial in ensuring air quality. Standards such as ISO 8573 specify the acceptable limits for contaminants in compressed air, including oil content, particulate matter, and moisture. Compressors should be selected, installed, and operated in accordance with these standards. Regular auditing and certification processes can help ensure ongoing compliance and provide assurance of air quality to stakeholders.

6. Training and Education:

Proper training and education of personnel involved in the operation and maintenance of oil-free compressors are vital. Operators should be familiar with the specific requirements of oil-free compressors, including the importance of filtration, maintenance procedures, and recognizing signs of potential issues. Training programs can help ensure that operators have the necessary knowledge and skills to maintain air quality effectively.

By considering equipment selection, implementing robust filtration systems, conducting regular maintenance, performing air quality testing, complying with standards, and providing appropriate training, the air quality produced by oil-free compressors can be effectively ensured. These measures are essential for applications where air purity is critical, safeguarding product integrity, process efficiency, and the health and safety of personnel.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

What Is an Oil-Free Air Compressor?

An oil-free air compressor, also known as an oilless air compressor, is a type of air compressor that operates without the use of lubricating oil in the compression chamber. Unlike traditional air compressors that rely on oil for lubrication and sealing, oil-free compressors employ alternative methods to achieve compression and deliver clean, oil-free compressed air. Here’s a detailed explanation of how oil-free air compressors work and their key characteristics:

Working Principle:

Oil-free air compressors utilize various techniques to compress air without the need for oil. The most common methods include:

  • Dry Compression: In this method, the compression chamber doesn’t have any oil present. Special materials, coatings, and surface treatments are used to reduce friction and wear between the moving parts, allowing for efficient compression without oil lubrication.
  • Water or Air Cooling: Oil-free compressors often employ advanced cooling mechanisms, such as water or air cooling, to dissipate the heat generated during compression. This helps to maintain the operating temperature within acceptable limits and ensures the longevity of the compressor.
  • Piston Rings and Seals: Instead of relying on oil for lubrication and sealing, oil-free compressors use specialized piston rings, seals, or other forms of dry frictionless technology. These components provide the necessary sealing and reduce internal friction, allowing for efficient compression without the need for oil.

Characteristics of Oil-Free Air Compressors:

1. Clean and Oil-Free Air: The primary advantage of oil-free air compressors is that they deliver air that is free from oil contamination. This makes them suitable for applications where oil contamination can be detrimental, such as in the medical, pharmaceutical, food and beverage, electronics, and automotive industries.

2. Low Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated compressors. Since there is no oil to change or monitor, maintenance tasks related to oil filtration, oil changes, and oil disposal are eliminated. This can result in cost savings and reduced downtime.

3. Compact and Lightweight: Oil-free compressors are often designed to be compact and lightweight, making them portable and easy to transport. This makes them suitable for applications where mobility is required, such as construction sites, workshops, and on-site maintenance tasks.

4. No Oil Contamination Risk: With oil-free compressors, there is no risk of oil contaminating the compressed air system. This eliminates the need for additional filtration or separation equipment to remove oil from the compressed air, simplifying the overall system design.

5. Lower Initial Cost: In general, oil-free compressors tend to have a lower initial cost compared to oil-lubricated compressors. This can be advantageous for applications with budget constraints or when the specific requirements of the application align with the capabilities of oil-free compressors.

It’s important to note that oil-free air compressors may have certain limitations compared to oil-lubricated compressors. They may have lower maximum operating pressures and higher operating temperatures. Additionally, the absence of oil lubrication may result in slightly reduced efficiency and increased wear on certain components over time.

By understanding the working principle and characteristics of oil-free air compressors, users can determine whether this type of compressor is suitable for their specific application and requirements.

China Professional Oil Free Medical Air Compressor 545W for Dental Chair Unit   portable air compressorChina Professional Oil Free Medical Air Compressor 545W for Dental Chair Unit   portable air compressor
editor by CX 2024-02-25

Recent Posts