China supplier 22kw 30HP CZPT Oil Injected Screw Air Compressor Fix Speed 7 8 10 13 Barg lowes air compressor

Product Description

 

Crownwell Oil-Injected Rotary Screw Compressors

 CWD 7-400 & CWD 7-400 PM
Power output: 7-400 kW / 10-500 hp
Delivery rate: 0.8-71.2 m3/min / 28-2514 cfm
Pressure range: 7-13 bar / 100-190 psig

CROWNWELL COMPRESSOR – HIGHEST STHangZhouRD

SIMPLICITY BUT NOT SIMPLE

For 3 generations, customers from mechanical engineering, industry and trade have relied on CZPT know-how when it comes to plHangZhou, developing and manufacturing compressed air systems. They are fully aware of the fact that CZPT AIR is more than just ordinary compressed air: utmost safety, outstanding efficiency, excellent quality, maximized flexibility along with dependable service are the ingredients to transform CZPT AIR into air to work with – in China, in Asia and in more than 102 countries around the world.

The III generation, the basis for economical compressed air production

The Know-How
More than decades of know-how in manufacturing for the compressed air market. World wide knowledge in different compressed air applications have guided the development of customer specified stationary screw compressors.

Technical Advancement for your Benefit
The advantage of CZPT lies in its simplified construction. Fewer components are utilized. This means a 60% reduction in main and wearing parts and over 70% fewer pipes and connections. In turn, this greatly reduces the risk of leakages, making the system environmentally friendly. Safe direct drive operation without V-belt transmission.

The CZPT CZPT works in the following way:
Ambient air is drawn through the intake filter and the multifunctional control system into the CZPT block. This block consists of a pair of screw rotors. The main rotor, driven by an electric motor, takes the secondary rotor with it. The air is drawn in by the rotation of both of the interlocking rotors and is continually compressed. During rotation, coolant is injected into the rotors and forms a hydrostatic film between the main and secondary rotors. The function of the coolant is to seal the rotors, lubricate the bearings and adsorb the compression heat. Before compressed air leaves the compressor ( at 80 ºC approx.) it is separated from the coolant before being cooled in the aftercooler to approx.. 8ºC to 12ºC above the ambient temperature. The coolant then passes to the thermostatic control block and filter, before entering the cooler where it is cooled from approx.. 80ºC down to 50ºC. It is then injected back into the CZPT block.

Features:
Direct drive via flexible coupling.
Fully encapsulated CZPT CZPT block.
Standard electric motor Protection Index IP23 and IP54.
User friendly service access.
Top quality, washable, oil resistant sound insulation.
Ready for operation, prewired and fully enclosed.
With operating mode selector switch Automatic-Off-Continuous.
Centrally mounted cooling fan provided for compressed air and lubricant coolers.
Compact and neat cabinet design.

Optional Equipment:
Sense of rotation
Multiple unit control with automatic base load selection
Full motor protection
Mains isolator switch for wall mounting

Beyond these features we offer a wide choice of compressed air accessories in reference to our compressor product range.
Energy Recovery Systems CROWNWELL-THERM
Compressed Air Filters
Compressed Air Dryers
Condensate Traps
Oil-Water Separators
Compressed Air Receivers

Crownwell OIL-INJECTED FIXED SPEED COMPRESSOR
 

TECHNICAL SPECIFICATIONS CWD 7-400
(7.5-400kW / 10-500hp)
 

Model Motor Power
kW / hp
Free Air Delivery
m3/min
Noise Level
dB(A)
Dimension
L * W * H
mm
Weight
Kg
7barg 8barg 10barg 13barg
CWD7 7.5 / 10 1.3 1.2 1.0 0.8 66 880*700*920 240
CWD11 11 / 15 1.7 1.6 1.4 1.2 68 1080*750*1000 400
CWD15 15 / 20 2.5 2.3 2.1 1.9 68 1080*750*1000 420
CWD18 18.5 / 25 3.2 3.0 2.7 2.4 68 1280*850*1160 550
CWD22 22 / 30 3.8 3.6 3.2 2.8 68 1280*850*1160 580
CWD30 30 / 40 5.3 5.0 4.5 4.0 68 1280*850*1160 600
CWD37 37 / 50 6.8 6.2 5.6 5.0 68 1400*1000*1290 800
CWD45 45 / 60 8.0 7.3 7.0 5.9 72 1400*1000*1290 850
CWD55 55 / 75 10.1 9.5 8.7 7.8 72 1800*1230*1570 1660
CWD75 75 / 100 13.6 12.8 12.3 10.2 72 1800*1230*1570 1800
CWD90 90 / 125 16.2 15.5 14.0 12.5 72 1800*1230*1570 1900
CWD110 110 / 150 21.2 19.8 17.8 15.5 72 2400*1470*1840 2500
CWD132 132 / 180 24.5 23.2 20.5 17.8 75 2400*1470*1840 2700
CWD160 160 / 215 28.8 27.8 25.0 22.4 75 2400*1470*1840 3000
CWD185 185 / 250 32.5 31.2 28.0 25.8 75 3150*1980*2150 3500
CWD200 200 / 270 36.0 34.3 30.5 28.0 82 3150*1980*2150 4000
CWD250 250 / 350 43.0 41.5 38.2 34.9 82 3150*1980*2150 4500
CWD315 315 / 400 51.0 50.2 44.5 39.5 82 3150*1980*2150 6000
CWD355 355 / 450 64.0 61.0 56.5 49.0 84 3150*1980*2150 6500
CWD400 400 / 500 71.2 68.1 62.8 52.2 84 3150*1980*2150 7200
  • Unit performance measured according to ISO 1217, Annex C, Edition 4 (2009)

Reference conditions:
-Relative humidity 0%
-Absolute inlet pressure: 1 bar (a) (14.5 psi)
-Intake air temperature:  20°C, 68°F

  • Noise level measured according to ISO 2151:2004, operation at max. operating pressure and max. speed; tolerance: ±3 dB(A)

Crownwell OIL-INJECTED PERMANENT MAGNET COMPRESSOR

TECHNICAL SPECIFICATIONS CWD 7-400 PM
(7.5-400kW / 10-500hp)
 

Model Motor Power
kW / hp
Free Air Delivery
m3/min
Noise Level
dB(A)
Dimension
L * W * H
mm
Weight
Kg
7barg 8barg 10barg 13barg
CWD7 PM 7.5 / 10 1.3 1.2 1.0 0.8 66 760*700*920 200
CWD11 PM 11 / 15 1.7 1.6 1.4 1.2 68 980*750*1000 350
CWD15 PM 15 / 20 2.5 2.3 2.1 1.9 68 980*750*1000 360
CWD18 PM 18.5 / 25 3.2 3.0 2.7 2.4 68 1120*850*1160 500
CWD22 PM 22 / 30 3.8 3.6 3.2 2.8 68 1120*850*1160 520
CWD30 PM 30 / 40 5.3 5.0 4.5 4.0 68 1120*850*1160 550
CWD37 PM 37 / 50 6.8 6.2 5.6 5.0 68 1280*1000*1290 750
CWD45 PM 45 / 60 8.0 7.3 7.0 5.9 72 1280*1000*1290 780
CWD55 PM 55 / 75 10.1 9.5 8.7 7.8 72 1800*1230*1570 1600
CWD75 PM 75 / 100 13.6 12.8 12.3 10.2 72 1800*1230*1570 1800
CWD90 PM 90 / 125 16.2 15.5 14.0 12.5 72 1800*1230*1570 1900
CWD110 PM 110 / 150 21.2 19.8 17.8 15.5 72 2400*1470*1840 2500
CWD132 PM 132 / 180 24.5 23.2 20.5 17.8 75 2400*1470*1840 2700
CWD160 PM 160 / 215 28.8 27.8 25.0 22.4 75 2400*1470*1840 3000
CWD185 PM 185 / 250 32.5 31.2 28.0 25.8 75 3150*1980*2150 3500
CWD200 PM 200 / 270 36.0 34.3 30.5 28.0 82 3150*1980*2150 4000
CWD250 PM 250 / 350 43.0 41.5 38.2 34.9 82 3150*1980*2150 4500
CWD315 PM 315 / 400 51.0 50.2 44.5 39.5 82 3150*1980*2150 6000
CWD355 PM 355 / 450 64.0 61.0 56.5 49.0 84 3150*1980*2150 6500
CWD400 PM 400 / 500 71.2 68.1 62.8 52.2 84 3150*1980*2150 7200
  • Unit performance measured according to ISO 1217, Annex C, Edition 4 (2009)

Reference conditions:
-Relative humidity 0%
-Absolute inlet pressure: 1 bar (a) (14.5 psi)
-Intake air temperature:  20°C, 68°F

  • Noise level measured according to ISO 2151:2004, operation at max. operating pressure and max. speed; tolerance: ±3 dB(A)
  • PM-Permanent Magnet

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Lubrication Style: Lubricated
Cooling System: AC Cooling and Air Cooling
Power Source: AC Power
Customization:
Available

|

air-compressor

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China supplier 22kw 30HP CZPT Oil Injected Screw Air Compressor Fix Speed 7 8 10 13 Barg   lowes air compressorChina supplier 22kw 30HP CZPT Oil Injected Screw Air Compressor Fix Speed 7 8 10 13 Barg   lowes air compressor
editor by CX 2023-06-06

Recent Posts