Flammable And Explosive Gas And Special Required Gas Compressor Of CMN Series

The advantage comes from the excellent performance of the CMN main engine, the embodiment of water lubrication technology without shaft seal design, the main engine does not leak oil, does not need any lubricating oil, and the shaft seal cannot be used for a long time. CMN has developed a compact, non-contact, wear-resistant shaft-sealless design to solve the problem of difficult sealing. Seal life is referred to as a shaftless seal design. Energy saving, air production is 10% more than same power, electrical equipment… FOB Price: USD 0.5 – 9,999 / Piece Minimum Order Quantity: 100 Piece Supply Ability: 10000 Pieces per Month Terms: L/C, D/A, D/ P, T/T The following is the introduction of CMN series flammable and explosive gas and gas compressors with special requirements, hoping to help you understand better.

Gas that is explosive and flammable, as well as Specially Designed Gas Compressor

Compressors designed for explosive, flammable, or any other special gases require special features in their design for safety as well as effectiveness.

It is first important to select materials that are compatible with the compressed gas. Some gasses are extremely corrosive, therefore the compressor should be constructed from materials that resist erosion, corrosion as well as chemical reactions. The compressor must also be designed to avoid the release of gas or explosions by using features like explosive-proof seals and spark-resistant materials.

Second, compressors have to be designed to accommodate the particular properties of the gas being compressed like temperature or pressure as well as volatility. For instance, some gasses may require a specific cooling system to ensure the temperature is at a safe level when compressed.

The third reason is that compressors for explosive or flammable gases should include safety features, such as automatic shut-downs, alarms, or sensors that detect and respond to potentially dangerous situations.

Additionally, compressors that are designed for specifically required gases should meet special specifications, including the purity of levels and flow rates as well as delivery pressures. They should be designed with precise control systems to make sure they meet these specific requirements.

In general, compressors that are explosive, flammable, or special requirements gases should be constructed with safety and dependability in mind, as well as considering the specific characteristics and requirements of the gases to ensure the best performance.

Specifications of Gas Compressors that are Required for Special Use Compressor

CMN series of flammable and explosive gas, and other needs for gas compressor
The advantages stem from the exceptional performances of the CMN main engine and also the implementation of water lubrication technology.

1. There is no shaft seal design Main engine does not leak oil.
2. In the absence of any lubricating oil the shaft seal is not able to be extended for any length of the period of time. CMN has designed a high-precision non-contact, wear-resistant, shaftless seal that eliminates the problem of sealing. The life of the seal is described in the form of a shaftless seal.
3. The energy savings, the gas production is 10% higher than electricity directly saving over 10 percent of electricity.
4. The requirement for water lubrication that is oil-free is the fact that volumetric efficacy must exceed 95%. That is leakage must be less than 5 percent. CMN Oil-free Production Technology is used to screw air compressors bearing oil which increases efficiency and ensures that the air leakage rate is lower than 4 percent.
5. Resistance to high temperature, the highest constant temperatures of this machine are lower than 92degC with an ambient temperature of 55degC.
6. The leakage rate for air in CMN has been reduced to less than 4% with less heat generation, and superior resistance to high temperatures.
7. There is content lower than 2PPM. The CMN high-efficiency main engine provides an outstanding sealing effect by injecting a small amount of oil to lubricate it, and the oil content is lower than 2PPM. This could be referred to as a micro oil screw air compressor

 Technical parameters of micro oil screw air compressor of CMN/A series

Model

Work pressure

FAD

Air Supply

temperature

Power

Noise

Oil content

(supply air)

Weight

Cooling

fan power

Air outlet

diameter

Dimension

L×W×H

MPa

M³/min

cfm

 °C

kW

dB(A)

PPM

kg

W

inch

mm

CMN08A

0.8

1.31

≤ambient

temperature

+15℃

7.5

62

≤2

302

120×1

3/4ʺ

990×640×980

1.0

1.11

CMN11A

0.8

1.81

11

62

322

120×1

3/4ʺ

990×640×980

1.0

1.52

1.25

1.35

CMN15A

1.6

1.21

15

63

505

370×1

1250×790×1290

0.8

2.60

1.0

2.35

1.25

1.73

CMN18A

1.6

1.67

18

65

535

370×1

1250×790×1290

0.8

3.30

1.0

2.90

1.25

2.40

CMN22A

1.6

2.4

22

65

565

370×1

1250×790×1290

0.8

3.90

1.0

3.50

1.25

2.90

CMN30A

1.6

3.04

30

66

730

1300×1

1 1/2ʺ

1500×950×1420

0.8

4.92

1.0

4.22

1.25

3.81

CMN37A

1.6

3.60

37

67

770

1300×1

1 1/2ʺ

1500×950×1420

0.8

6.30

1.0

5.50

1.25

5.10

CMN45A

1.6

4.53

45

68

1196

1800×1

1850×1105×1600

0.8

7.50

1.0

6.30

1.25

5.84

CMN55A

1.6

5.80

55

70

1290

1800×1

1850×1105×1600

0.8

10.30

1.0

9.10

1.25

7.60

CMN75A

1.6

6.90

75

73

1570

2200×1

1900×1200×1660

0.8

12.60

1.0

11.50

1.25

9.94

CMN90A

1.6

9.50

90

73

2270

370×1

2 1/2ʺ

2000×1320×1905

0.8

16.11

1.0

14.52

4000×1

1.25

12.30

CMN110A

1.6

11.60

110

78

2290

370×1

2 1/2ʺ

2000×1370×1980

0.8

20.10

1.0

17.10

4000×1

1.25

15.22

CMN132A

1.6

15.10

132

78

2550

370×1

2 1/2ʺ

2000×1370×1980

0.8

23.10

1.0

20.38

4000×1

1.25

18.29

CMN160A

1.6

19.10

160

78

3800

 3500×2

 3ʺ

2900×1720×2100

0.8

28.85

1.0

24.52

1.25

22.17

CMN200A

1.6

21.90

200

78

4100

 5500×2

3100×1800×2292

0.8

36.63

1.0

32.70

1.25

27.72

CMN250A

0.8

42.88

250

78

4500

 5500×2

3100×1800×2292

1.0

39.00

1.25

34.64

1.6

27.4